| Color | : | White |
| Current/Amps | : | 0.3 A |
| Duct Diameter | : | 4 in |
| Flow Rate | : | 110 cfm |
| Frequency Rating | : | 60 Hz |
| Grille Length | : | 12-1/4 in |
| Grille Material | : | Polymeric |
| Grille Width | : | 12-1/4 in |
| Housing Height | : | 5-3/4 in |
| Housing Length | : | 9-1/4 in |
| Housing Material | : | 26 ga Galvanized Steel |
| Housing Width | : | 10 in |
| Mounting Type | : | Ceiling |
| Series | : | Flex™ Series |
| Sones | : | 1 sones |
| Voltage Rating | : | 120 V |
| Wattage Consumption | : | 23.4 W |
The Broan® Flex Series Ventilation fan with CleanCover™ grille clears the air with a low profile, streamline design. Say good-bye to unsightly standard grilles that catch dust and debris and can be a hassle to clean. With CleanCover™, your fan cover stays cleaner for longer with fewer vent slots to clean and design that coordinates with any decor. Designed for retrofit, remodel and replacement, this fan features hassle-free installation from the room side, for spaces with no attic access. The SnapFit Flange Kit, EzDuct™ connector and FoldAway™ mounting ears make it flexible to almost any installation challenge, especially for rooms on the first floor or basement floor of the home. Each carton comes complete with a precise template for accurate housing opening ceiling cut. The SnapFit Flange Kit provides a self-trimming finish to cover a rough cut.
Broan® Bathroom Exhaust Fan, Series: Flex™ Series, 110 cfm Flow Rate, 4 in Diameter Duct, 120 V, 0.3 A Current/Amps, 60 Hz Frequency, 23.4 W Wattage Consumption, 1 sones, 12-1/4 in Grille Length, 12-1/4 in Grille Width, Polymeric Grille, 9-1/4 in Housing Length, 10 in Housing Width, 5-3/4 in Housing Height, 26 ga Galvanized Steel Housing Material, Ceiling Mounting, White
- 110 cfm, powerful ventilation to remove moisture and reduce the risk of mold or mildew in most full baths
- 1 sones for whisper quiet operation
- Broan® Flex™ series ventilation fans easily install from the room side, which makes it possible to retrofit to spaces with no attic access
- CleanCover™ grille stays cleaner longer with fewer vent slots to collect dust
- FoldAway™ mounting ears precisely positioned the fan for new construction applications or fold flat for retrofit installations with no attic access
- EZDuct™ connector creates an air tight seal while connecting to the duct from below the ceiling
- 30% more airtight installed performance vs standard ventilation fans
- SnapFit flange kit offers flexible installation for new construction or retrofit upgrades
- 4 in duct connector with damper
- Fits 2 x 6 in ceiling construction
- UL listed for use in insulated ceilings (type IC) and HVI-2100 certified for safety
- UL listed for use over bathtubs or showers when connected to GFCI protected branch circuit (not included)